Member yukonal
MemberForum Replies Created
-
You can just swap out the bolt stop, for a long action caliber stop, and get a long action magazine. Then, the sky's the limit. First, you need to ask someone loading your intended round, what their OAL is. Then measure the inside diameter of your MED action mag to see if you need more room.
That's what I did on my .284 on the home page. I'm seating 180's out to the lands (after chambering with a reamer I designed just for 180's) with room to spare.
-
I carry a gunsmithing screwdriver set that has all the diff bits. And a long skinny punch, or one of them bent torx wrenches to take out, or put back in, sling studs as needed.
Tape, 1″ sheetrock screws, or staples for targets. Safety glasses, and hearing protection. Notebook, pens and Sharpies for taking notes. Orange flagging tape for wind.
These are the things I use ALL the time. There are others, but they're probably just my quirky things…
-
We try our best! 😉
-
Glad to help, and really glad you're more comfortable with your rifle.
-
I like my Vais, except when shooting prone…it kicks up crap from under the barrel.
My new .284 build is getting a Mini Magnum Muscle Brake. I think it's the cat's meow. Google “Muscle Brake”.
They make a HUGE difference in the recoil department.
-
Welcome Koot! You've got a real hammer! And in a great caliber. Feel free to jump in with any questions…or advice. 🙂
-
I shoot a different powder in almost every caliber. Lots of experimenting has brought the crèam to the top.
-
That's a tough one. I find, that when recoil is bothering me, I really suck the rifle in tight to my shoulder and hold it as tight as possible.
The standard Tikka recoil pad is worthless. You could change that to a LimbSaver, and consider a muzzle brake. But definiately, shoot with a firm grip, and 2 hands.
-
Well, it seems we're all learning a little bit about B&C stocks as we go. I would have your 'smith skim bed the stock/action, and make sure he beds the bottom metal also. Not doing so can haunt you.
-
Matt-there are differences in the stocks, actions, bedding, etc.
But, Tikka and Sako both use the same barrel. That's why they are so accurate.
-
Ask away. What would you like to know?
-
This isn't too bad either…
-
now for the optic mount… I don't like rails. ive managed to avoid having rails on any of my guns mostly because I think they are ugly.
Talley Lightweights. Lows will still give you clearance under a 50mm objective.
-
Jason-I'm in for one of the “classic” wood stocks. They look great!
How do I subscribe to the “alerts” (he he) that you talk about at the end of the short stock video? Anyway, subscribe me, will you please?
Really glad you are working so hard to keep things moving ahead. I would personally like to thank you for all the effort you put forth. Thanks!!!
-
Jason-I'm glad to help out where I can.
I currently have 4 full blown customs being built on Tikka actions, and my special recoil lug design. Last weekend I took 2nd place in the Minnesota State F-Class championship with my Tikka Super Varmint in .223 caliber.
Last winter I sold every factory and custom rifle I owned, and switched my entire arsenal to Tikka's. I bought some used rifles for donors, and built 2 customs on existing actions. I feel that strongly about the Tikka platform.
Thanks again for turning me on to the Super Varmint! It's been a hoot.
