Forum Replies Created

Page 7 of 30
  • yukonal

    Member
    April 7, 2015 at 2:02 am in reply to: Bipods
    Tikka Shooters Forum favicon icon 1 Bullseye

    You need to set your budget a little higher. ;D

  • yukonal

    Member
    April 6, 2015 at 2:47 am in reply to: So far so good
    Tikka Shooters Forum favicon icon 1 Bullseye

    They can't shoot 1/2″ every day. I'm happy with anything 3/4″ or better at 100, and don't have a problem with 4″ at 400.

    3″ is better, tho. 😉

  • yukonal

    Member
    April 6, 2015 at 2:43 am in reply to: Tikka T3
    Tikka Shooters Forum favicon icon 1 Bullseye

    If you're going with a pic rail, I've heard some good things about the Weaver tactical rings.

  • yukonal

    Member
    March 31, 2015 at 2:26 am in reply to: Tikka T3
    Tikka Shooters Forum favicon icon 1 Bullseye

    Keep an eye on those factory rings. They are famous for not holding. If you decide to upgrade, I would suggest Talley Light Weights.

    Welcome, and congrats on your animals.

  • yukonal

    Member
    March 28, 2015 at 2:00 am in reply to: Starting from scratch, load development
    Tikka Shooters Forum favicon icon 1 Bullseye

    If wind isn't a problem, you can stretch that Sporter out. Always amazes me what a well built .223, and a steady hand can do. No wind, and 600 is boring with my Super Varmint.

  • yukonal

    Member
    March 26, 2015 at 3:07 pm in reply to: Tikka CTR 308 Bore Guide
    Tikka Shooters Forum favicon icon 1 Bullseye

    I use Lucas guides. I used Sinclair guides for many years, and they are a very nice product also.

  • yukonal

    Member
    March 25, 2015 at 1:42 am in reply to: Barrel Touch Up
    Tikka Shooters Forum favicon icon 1 Bullseye

    Birchwood Casey paint pen made for gunsmithing.

  • yukonal

    Member
    March 23, 2015 at 12:08 am in reply to: "Custom" magazine for T3 Lite 300WSM
    Tikka Shooters Forum favicon icon 1 Bullseye

    More like 50 articles/post pertaining to it. Use the search function.

  • yukonal

    Member
    March 23, 2015 at 12:06 am in reply to: .308 loading help
    Tikka Shooters Forum favicon icon 1 Bullseye

    Try some 165 Ballistic Tips with around 45 gr Varget and tweak it from there. You'll have a heck of a hunting load when you're done.

  • yukonal

    Member
    March 23, 2015 at 12:00 am in reply to: 7mm Mag load development
    Tikka Shooters Forum favicon icon 1 Bullseye

    I've shot mine out to 400 when it was factory stock, with a factory Laminated stock…un-bedded.

    I've since pillar bedded it into a factory synthetic stock, and am working on load development for it now. When I'm done with that, I'll pillar and glass bed it into the factory Laminated stock and work up some loads with it that way.

    You can't mess around with them enough! ;D

    Box, stock factory, no messing around.
    P3090009.jpg
    7Mag-400yds-1.jpg
    P3090006.jpg

  • yukonal

    Member
    March 21, 2015 at 12:34 pm in reply to: Stock pouch question
    Tikka Shooters Forum favicon icon 1 Bullseye

    Look up Triad Tactical. I have one of theirs on “Big Louie”, a previous Gun Of The Month. It looks a lot like the ones pictured.

  • yukonal

    Member
    March 21, 2015 at 12:25 pm in reply to: 7mm Mag load development
    Tikka Shooters Forum favicon icon 1 Bullseye

    Start out seating the bullets .010″ off the lands. With powder, start out loading 3 grains below book maximum, and work up in 1/2 grain increments until you reach the listed maximum charge in the manual you are using. You're probably safe to go over by a grain or two, but that's your call.

    168 VLD's will fit in your long action magazine, if it's the same ID as a T3. Be sure to use the “Hunting” VLD in the orange box, if you're going to hunt with the load you're developing.

    My 7 Mag T3 is an absolute hammer with 160 AccuBombs, and I'm sure yours will shoot great too.

  • yukonal

    Member
    March 19, 2015 at 1:07 am in reply to: Barrel replacement
    Tikka Shooters Forum favicon icon 1 Bullseye

    Mark,

    You might need to “chase the lands”. If you're reloading, your throat has eroded, and you're getting more bullet jump to hit the lands.

    Take a measurement of bullet ogive to lands relationship, and you'll have to be seating the bullet farther out to get the same relationship as before. Your throat has eroded some with shooting.

  • yukonal

    Member
    March 19, 2015 at 12:57 am in reply to: Starting from scratch, load development
    Tikka Shooters Forum favicon icon 1 Bullseye

    What is your intended use, hunting or punching paper?

    80 gr VLD's hammer in the 8 twist. That's what I shoot in my Super Varmint in F-TR competition. Never could get the A Maxes to shoot in mine.

  • yukonal

    Member
    March 19, 2015 at 12:50 am in reply to: Which powder should I use?
    Tikka Shooters Forum favicon icon 1 Bullseye

    4064 is a slow powder, that shines in a .308 with heavier bullets. I've never got it to work in my 708's.

Page 7 of 30