Replies – Forums – vixty – Page 3

Forum Replies Created

Page 3 of 6

← 1 2 3 4 … 6 →

vixty

Member
January 5, 2016 at 7:57 am in reply to: Short 223 varmint chamber

1 Bullseye

Well I ended up backing the fl size die back some so it doesn't bump the shoulder and now it's better and I'm able to get 2.282 with 55gr amax. The only thing I'm worried about is the neck is only getting halfway resized which might mess with my neck tension.

This makes no sense to me, but what should I, a class 06 ammo manufacturer know, anyhow? 8) 8)

I have no clue either. I have a tikka in 7mm-08 and the cases will do the same thing. When I set my FL size die I usually always turn it in until it touches the ram then back it out about 1.5 turns or the bolt will be hard to close. I'm not really sure why this is.
vixty

Member
December 28, 2015 at 5:36 am in reply to: Changing caliber?

1 Bullseye

I had my 30-06 rebored to a 35 whelen.
vixty

Member
December 28, 2015 at 5:28 am in reply to: Short 223 varmint chamber

1 Bullseye

I lube the inside of the neck on every 3rd or 4th case. My decapper is set flush with the top nut.
vixty

Member
December 28, 2015 at 2:50 am in reply to: Short 223 varmint chamber

1 Bullseye

Well I ended up backing the fl size die back some so it doesn't bump the shoulder and now it's better and I'm able to get 2.282 with 55gr amax. The only thing I'm worried about is the neck is only getting halfway resized which might mess with my neck tension.
vixty

Member
December 27, 2015 at 12:29 am in reply to: Short 223 varmint chamber

1 Bullseye

Yeah the bolt is really tight to close. I lost as if the lee fl size die doesn't form the shoulder correctly
vixty

Member
December 25, 2015 at 4:19 am in reply to: Short 223 varmint chamber

1 Bullseye

That's what I used
vixty

Member
December 18, 2015 at 10:40 pm in reply to: Rebarreling the action from 30-05 to 6.5 creedmoor

1 Bullseye

You can just leave it long action. My wife's t3 7mm-08 is running long and it feeds just fine. Just slide the rounds to the back of the mag.
vixty

Member
December 16, 2015 at 2:45 am in reply to: Rcbs 260 dies

1 Bullseye

Is a crimp die included?
vixty

Member
December 16, 2015 at 2:42 am in reply to: Bell & Carlson Stock

1 Bullseye

SOLD
vixty

Member
September 15, 2015 at 11:05 am in reply to: Electronic powder measures

1 Bullseye

Hi I'm thinking for getting a Lyman gen 6 dispenser , has anybody used one or what do you use , the gen 6 is rated at +-0.1 grn so it needs to be the same or if possible better, I don't need a memory function
Thanks

I use this scale for reloading and it works great. It will sometimes throw +- .1 but its easy to just tap the dispenser spout and to get the needed weight. in most cases it throws .1 under so it easy to just tap out a little more. If it throws over its east to just dump a little out and then tap it to the weight. The scale really speeds up the reloading process.
.
vixty

Member
September 10, 2015 at 5:48 am in reply to: Can you thread a Tikka T3 Hunter Barrel (308)

1 Bullseye

You can either do the 9/16 thread or you can get the barrel cut some and go with the 5/8.
vixty

Member
August 28, 2015 at 9:23 am in reply to: T3 Tactical 24" barrel

1 Bullseye

Theres a 308 varmint on GB right now, auction #503604477
vixty

Member
August 28, 2015 at 9:20 am in reply to: Tikka T3 Lite – Stainless Steel …….SOLD!

1 Bullseye

are you still trying to sell this rifle?
vixty

Member
August 10, 2015 at 9:12 am in reply to: Wtb t3 bolt stop

1 Bullseye

I think I have a short laying around somewhere
vixty

Member
August 7, 2015 at 7:13 am in reply to: Wtb t3 bolt stop

1 Bullseye

Which one. Long or short

Page 3 of 6

← 1 2 3 4 … 6 →