Member ShtrRdy
MemberForum Replies Created
-
You could put one of these on top. Then you would have more choices for rings.
http://www.tikkaperformance.com/Tikka%20T3%20Picatinny%20Rail%20Scope%20Mount
-
Whenever I've had trouble chambering rifle rounds, it's been because I didn't full length resize the brass when I reloaded it.
Is this a new rifle, or one that you've had, and used, a while?
-
That doesn't sound right. I can slip a dollar bill with mine all the way to the receiver.
Is that the case on both of your Tikkas?
-
On that stock, is the barrel free floating all the way to the receiver? The reason I ask is because my varmint model factory stock, the forend touches the first 3 or so inches of the barrel from the front of the receiver.
-
That's amazingly wonderful! What size groups were you getting with the factory stock? If I understand correctly, this is the factory barrel but a JARD trigger?
-
Looks like you have some nice products. Can you ship to the US?
-
Sounds interesting. I look forward to your progress.
-
That looks like a nice machine you have there. Do you have an anti-cant level installed?
What size groups are you able to shoot with it?
-
That's amazing! What kind of conditions were you dealing with at Pendleton?
Do you like the 6mm over the 6.5mm for long distances?
-
Hey Mark – do you have any more match experiences you can share with us? – Todd
-
Does that stock have metal pillars that the receiver is suppose to contact? If so, then it probably makes sense to relieve the tang area as needed so that you get a solid receiver to pillar contact.
-
I only have experience with a T3 in 22-250. The lands are way out there on that chamber. It sounds like your chamber might be a little short – but you might like it that way.
-
Nice rifle! Are you going to use the rings that came with the rifle or use something else?
-
I finally got out to shoot the Sierra 52 gr HPBT “matchking”.
For my next step, I'm going to try some of the better loads, like the 55 gr HPBT “gameking”, and the 50 gr “Blitzking”. This will give me a chance to check my technique.
-
Happy Easter to you too!!!! 😉
