[Larkin]

Don't bother about prices I started by using sako game heads very well made high end bullets but after my barrel was broken in couldn't get better than 1.5 Mia at 100 meters I now use federal eagle out of a group of 20 , 17 are sub 1moa the other3 1.5 Moa , don't let it spoil you shooting it will turn out ok in the end imo

[Larkin]

Sorry should have said its a Thirdeye Tactical Evo stock

[Larkin]

Hi
  Dose this torque setting count for all stock materials ,the reason I'm  asking is mines aluminium and just wondering if I should start experimenting with different settings 

[Larkin]

I'd keep around the 50/55 grn bullet but you can try heavier just to see as some rifle have been known to be ok , I was going to try some 69grn in my .223 st/st super varmint but advised against it has the bullet might not be stable with that twist ,

[Larkin]

Hi
  Thank you , thought that might be the case

[Larkin]

Hi them stocks are the dogs b*ll**ks if didn't go for third eye I would have a GRS stock there one of the best finished stocks I've seen

[Larkin]

IMO the third eye mounts are the dogs B###oks I have them on my .223 and would buy them again can't say fairer than that ,(I also have the third eye stock has well ), I also use a NF 5.5 x 22 scope again top quality don't be tempted by cheaper glass , it ok to be tempted by more expensive European glass

[Larkin]

Hi on my .223 I use a 5.5 -22-52 nightforce if your budget is bigger than mine I'd get some European glass like s&b etc

[Larkin]

Hi
There's plenty of people over here in England that rebarrel tikka or us tikka actions for semi custom rifles so I see no reason for it not being the same where you are

[Larkin]

Hi
  Thanks for the reply's if anybody has the time could you list all the other things I'm going to need to do a top reload , I'll only be reloading maybe a hundred or so at a time so only need the single press , I'd prefer to get a list off people on here rather than a sales man that's just after my £(I'm in England) ,I'm after a setup to do a good job not necessary a cheap job , also it doesn't have to be all the same manufacture , its to reload .223 at 100m if that makes a differance
List so far
      RCBs rock chucker press

      Beam scales (RCBS 5-0-2)

      primer pocket reamer (maker ?)

      throat brush (maker ?)

      powder measures (maker ?)

      match dies (forster)

      powder trickler (maker ?)

      throat chamfer tool (maker ?)

      primer hole deburrer (maker ?)

[Larkin]

Going to go to the shooting show here in England mid February ,at the moment Rcbs rock press is looking good , then I'll need every think else , I could get it all in a kit ? But I have been advised not to because one might make good presses another might make better scales for example 

[Larkin]

I'd jump on it if I were you.

Like the man says , go get it

[Larkin]

Hi
  The first think that pops into my mind is what distance will you be shooting , I have a st/st super varmint in a 10-1 twist and it's good out to 300 meters maybe 400 , if you need to go further you really need a 8-1 twist ! Hope this helps

[Larkin]

Hi
  Do a serch for thirdeye tactical , I've got one on mine

[Larkin]

Hi
  In theory you can order one from the factory , I was told it would be a 6month wait ,a friend of mine knows several people that have ordered one from the factory 9/12 months down the line still no rifle and no sign of one, you could keep searching for a good second hand one (like hens teeth) ,or if it was me you could get a less than good one then have it re barrelled , it all depends on the budget / access to a good gunsmith , my .223 is a 10-1 shooting paper at 100m and I'm told can go out to 300m , 400m at a push it all depends on what  its going to be used for