Moderator Larkin
ModeratorForum Replies Created
-
It's a floated barrel they should be a gap , have you used a toque wrench to retighten the action screws , any other questions just ask
-
Just go and shoot it
-
You could try mountain tacticals new billeted mags
-
Why by a light hunting rifle in a largish caliber , and complain about recoil and over heating , light barrels will get hot there not made for lots of shots after one another , and for the recoil the lighter the gun the more recoil , the problem seam to me be you and not the gun you have got the wrong gun for you needs
-
Also did you check that the rail was tight before you put the scope/ mounts on
-
Try backing off the cleaning , your barrel might like a bit of copper inthere to shoot , also just check to see if the barrel is floating all the way to the front of the action
-
Is the scope on tight
-
Over here in England there's load of propellants from Hodgdon that are getting band , because of some of the stuff there made up of , managed to get enough H4350 to last the life time of my barrel in my Creedmoor , get offered 50 tubes of H4350 , I didn't take all 50 but I've made a nice profit on the one's I did get about 25% mark up ,
-
Hi welcome , imo it's the ppu there's a reason why it's cheap
-
If it's just recoil have you tried a muzzle brake or a moderater they both can reduce the recoil that's felt
-
Got offered 50 tubs , but I didn't have the storage required here in England for so much , made 25% profit on the amount I managed to get and store
-
Glad you've got it sorted
-
I think you have a 50 cm barrel , not the 60 you wanted just take it back to the shop and show them , if it's a good Rfd they should swop it over with the minimum of fuss , if not threaten legal action and all the bad press that intails
-
Easy way to check just go onto Tikka's web site and see what the overall length should be for your barrel length
-
H4350 and Varget are being band here in the Eu and The U.K. On health and safety grounds because of some of the compounds its made up off , good job I've enough H4350 to see the barrel out on my Creedmoor
