Ericbc7
MemberForum Replies Created
-
21 Bullseyes
I know this is late, but try the Lapua 139 gr Scenar ammunition. Don’t be afraid of trying lighter points like 123 gr Lapua.
-
21 Bullseyes
180 gr monolithic bullets like the Barnes type are a bit longer than cup-&-core traditional bullets. They may not stay stabil at long range with 1:11 twist. Check with the bullet manufacturer.
-
21 Bullseyes
Larkin is again spot on. If there is no debris in the bolt, there are many high tech lubes that may be the answer. It is rare though that any tikka has issues of this type so don’t be shy of returning it for service.
-
21 Bullseyes
I 2nd Larkin on the mt mags, also the Australian mags are very nice.
http://www.aihpa.com/Sponsor/Tikka_T3_Mag_Options/Tikka_T3_Mag_Options.htm
-
21 Bullseyes
I would get a mountain tactical picatinny rail which would let you mount a variety of rings.
The factory rings are not my choice. -
Ericbc7
MemberApril 18, 2018 at 6:47 am in reply to: MY first Tikka ……the model with factory installed rail 21 Bullseyes
Hey critter, you just bought a first rate precision rifle series (prs) quality rifle.
Look at the Burris tac rings which let you change inserts to add 10-20 moa.
Low profile Mags are tricky and I don’t know of any currently.
Good luck! -
21 Bullseyes
I don’t have anything to add regarding tac a-1 measurements, but a buddy of mine has one in 6.5 cm and it is a spectacular shooter
-
21 Bullseyes
One other factory load you should try is the Lapua 69 gr. Scenar It’s on sale now at bullets.com until they sell out. It’s really good ammo for 1in 8 twist barrels!
http://www.bullets.com/products/-223-Rem-69-Grain-Scenar-HPBT-Ammo-Box-of-50/BL11003 -
21 Bullseyes
I am keen to see if the new mountain tactical mags work as well as the ausi ones
-
21 Bullseyes
I also am interested in the 300 win mag… is the tikka too long in the throat? Or too short in the magazine?
-
21 Bullseyes
Great evaluation, if you get into reloading I will be interested in your results!
-
21 Bullseyes
If budget is not a criteria, then spur, or addmount . I am inclined to go with addmount since they do great work on other aspects of Precision shooting.
They do fantastic scope covers, and great mounts. -
21 Bullseyes
Dnz rings or mounts are quite good, but will still need lapping. (My experience).
-
21 Bullseyes
Curious problem, cheap ammo works, good ammo is dificult… am I correct in my caracterization?
-
21 Bullseyes
My bud just got a tac-A1
Use snap caps unless you have a reason not to…meaning use snap caps