Member Dog Down
MemberForum Replies Created
-
I think the only difference between the Hunter & Lite models is the stock…wood versus synthetic which changes the weight…everything else is the same.
Specs attached…
-
I'm soooo Jealous!!!
What model?
-
Larkin, Those scopes are beauties! I'm very jealous…I've only had the pleasure of looking through one at the range. And its not very often you see them in my neck of the woods.
-
I've hunted with and also used this scope for target shooting. Sold it to a guy who now has it mounted on his Tikka 30-06 for all his hunting…highly recommend it for both hunting and target shooting if you are on a budget and looking for 1 scope to do everything for well under $500….I've seen them going for as low as $300.00…
http://www.midwayusa.com/product/1320585073/nikon-prostaff-5-rifle-scope-45-18x-40mm-matte
Glass is GREAT! We've shot and compared this scope side by side to both of my Vortex HSLR's and glass is pretty much on par, can't really tell a difference..Guys will chirp a lot of crap about Nikon but I can't see how they are being honest if they have actually used this scope in the field. The added “extra” set of high MOA turrets and caps makes it a super deal!
My buddy has this scope mounted on his Browning Bar 270 for hunting…Great scope for quick close shots on 2.5 power in the bush… Very nice and a deadly combo on our deer hunts!
http://www.midwayusa.com/product/1320260685/nikon-prostaff-5-rifle-scope-25-10x-40mm?cm_vc=ProductFindingTake a look at them the next time you are in a store, glass in both scopes will be better then anything you will compare it to in your price range through the entire full magnification range.
-
I respect Dogdown for most things, but using a bore snake is where I disagree. get a solid stainless rod of the appropriate caliber and a good bore guide and clean from the breach. the snakes can and do collect particles that can abrade the bore. ok all that said, I am totally open to hearing what dog has to say on the matter, and am willing to change my mind.
Hey Eric,
Ur not wrong in your your assumption, BoreSnake's can and do collect particles in the rifle that can abrade the bore, but so can a patch & rod, both if used incorrectly will cause bore damage. I would only use a Carbon Fibre or coated rod in my guns if I was using a rod & patch cleaning routine. I would never use a bare metal especially stainless in the barrel, if a bare rod is used most gunsmiths say it needs to be softer then the bore,… brass for example.
Like anything you have to use some common sense when cleaning your rifle with a bore snake.
If its dirty…you wash it!!! You wouldn't reuse patches, so why would you continue to use a dirty BS over and over.. They have to be washed to get rid of the old crap, do this and you won't have a problem.
I use a bucket and a mixture of soap solution to clean them (wife does not like them in the washer, so happy wife = happy life!) about every month or so depending on the amount of shooting I do at the range.
Warm water and soap and its like new again, takes minutes and then I just hang to dry.If BoreSnakes actually hurt rifle barrels in anyway HOPPE'S would be in a world of trouble…
Its a more advanced modern way of cleaning your rifle, period. Its proven to be just as effective as a rod & patch, and is the easiest method of cleaning a gun barrel for new shooters. Until you have used and examined one you can't make an honest judgement call on which is better. I like both and have not seen any better results with a rod & patch so I use a BS on all my guns now.The only time I think a rod will out perform a BS is when you have a gun that as been neglected and the barrel is completely full of copper. A rod & patch will be better for this application with the amount of cleaners / solvents you have to use.
Links for both:
http://www.guncleaningtips.com/bore-snake-bore-brush-jag-rod-and-patch-all-in-one/
http://www.guncleaningtips.com/the-best-cleaning-rods/ -
Great vid for anyone interested in the topic of cleaning guns…I respect this guys opinion on most anything involving firearms…
https://www.youtube.com/watch?v=uhTwVOh0_ik -
I've only used “bore snakes” with a brush on my guns….rifles and shotguns, it does a great job.
I've never seen the need to use anything else. Hobbe's #9 cleaner & copper solvent for regular use and Hobbe's Elite foaming cleaner when it's really dirty (be careful with this one on gun finishes), and a good oil after has not let me down.Can honestly say I have never cleaned my personal guns with a rod & patch…But have friends that only use a rod & patch with a good bore guide. BUT I've seen many people damage / scratch their guns using a cheap cleaning rod incorrectly, especially around the crown.
Not knocking guys who use rod & patches, just letting you know a brush has not harmed any of my guns over years of cleaning using a bore snake.
-
Nice results on a test comparison, same rifles in 308 & 260…with real shooting data
http://www.24hourcampfire.com/ubbthreads/ubbthreads.php/topics/6552028/1The ballistic advantage of the 260 is very clear even at 500-600yrds…have not seen many test like this using the same rifle make / model so its a true test.
-
Available again Canada so maybe they will be available in the US soon…
http://www.wholesalesports.com/store/wsoo/en/Categories/Hunting/Firearms/Bolt-Action-Rifles/T3-Hunter-Stainless-Fluted/p/34866 -
The CTR matte finish is more durable then the normal blued finish, its will resist and hide scratches more easily. Its very similar to an AR finish but can't honestly say its the same. I do think its a higher quality finish then any AR I've handled though…
The 260 is gaining in popularity and there will be more ammo choices, can't compare the 2 that way, the 308 has been around for a long time and everyone is making a 308 round.
Some good ammo and some really and ammo…Out of the 161 offerings you mentioned for the 308, your gun may only shoot 1-2% of that at sub MOA…so not something I would dwell on.
I know people say they want to be able to walk into any store and buy ammo for their gun, thats fine if you are shooting gallon jugs at 100yrds or just plinking…I can honestly say I've never hunted with anyone who didn't bring enough ammo for a hunt, or didn't bring enough ammo to the range. There is no excuse for forgetting to bring ammo. Always make sure you have the bolt, mag and ammo for any gun in the case before you leave the house.I guess you need to make the choice you feel comfortable with.
But for me the choice would be the 260 if you are shooting at any distance. I have 2 – 308's, I'm not knocking the 308 or thinking its bad…just saying I know what its capable of and wish I had a 260 or 6.5 for 90% of the shooting I do with my 308's…the other 10% is a carry gun with open sights, a Tikka battue for pushing deer. -
If you don't reload and already have a 308 I'd go for the 260…especially if you want to shoot long range later. Which you will once you see the accuracy the gun is capable of.
The 260 will give better ballistics out to 1000yrds and beyond, and it is an excellent choice for the hunting purposes you have mentioned.I have a 308CTR and wish it was a 260…If I had the chance to do over I would have waited for the 260.
The next gun I purchase will be a 260 or 6.5 of some sort… -
Have you tried hitting the receiver / rail with a soft mallet? Sometimes thread lock will stick the rail to the receiver.
You could also try a little heat with a torch to warm it up…
As I mentioned above…this is a simple removal. Don't be afraid to pull the sucker off!
I was working on my guns today and figured I do you a favour…Take a look at the pictures attached.
– Remove the 4 screws…Light tap with a rubber hammer, and apply upward pressure to release the thread lock they use on the rail and screws. Its that simple…The only difference in the CTR rail is the built in receiver recoil lugs that protrude up through the rail.
If you can't get yours off, you aren't applying enough pressure….there is nothing to break, it pops right off!
-
All my Tikka's are set to a crisp 2lbs or less, great factory trigger!
I really can't see why anyone would change it out to be honest. -
Maybe I'm misreading your post but: http://www.eurooptic.com/tikka-t3-hunter-stainless-fluted.aspx
Your not missing anything….you can find them advertised as per your link at multiple gun dealers but they are not in stock anywhere.
They are on back order everywhere…good luck waiting for another shipment.
-
Whatever you decide…if you buy a T3, its gives you the platform to makes changes and build on a solid action for cheap later.
Do you have a set budget in mind?
