I’m searching for a choke for my m 07 it’s only 1 1/2 inches long , looks like about 7 threads or so. The one I have is a modified. I’m looking for a full or extra full. Does anyone know where I can find any? Thanks

Has anyone pillar bedded their T3X? Was it worth the effort? MTG

German Precision Optics (GPO) are really nice, but I am going to use my Riton 4×16 on my new Tikka. Euro Optics is a great place to look. I bought my Riton from them during a warehouse sale for $200 with no shipping or sales tax.

I picked up a TX3 light yesterday, I haven’t shot it yet. Even though this model is the bottom of the Tikka barrel so to speak, it impressed me. My gun is chambered in 350 Legend, for deer hunting in Ohio, really long range isn’t much of a concern for me. I would like to change the trigger guard to metal, and why does Tikka not list all the…

Read more

I just bought a Tikka T3x Veil Wideland in 6.5 Creedmoor. I plan to load with Pederson or Lapua small primer brass.

Whose sizing dies most closely matched the Tikka 6.5 Creedmoor chamber?

<font color=”#4d5c6d”><font face=”Roboto”><font size=”3″>I have to
update my earlier message where I castigated Dave regarding my SRLB
for my Tikka T3 X TAC A1’s.</font></font></font>

<font color=”#4d5c6d”><font face=”Roboto”><font size=”3″>Dave misplaced
our correspondence. </font></font></font>

<font color=”#4d5c6d”><font face=”Roboto”><font…

Read more

I’ve seen OEM risers for the T3x “varmint” model advertized. Would the same riser fit the stock on a Lite Veil Wideland?

Where can I order a Tikka T3x OEM cheek riser in any color except orange? I can only find them on EuroOptics and in orange only. Supposedly they are made in green, black, or gray. But I can’t find any retailer that carries any of these.

LHi I’m from Australia. Tikka had a bad run of barrels. You need to pull a lead projectile from a .22lr and crush it to rough size of your calibre. Keep running it through your barrel till it runs like a proper size projectile. It should be consistent resistance the whole way through. Mine had tight and loose spots. 2 times t3 lites replaced u…

Read more

I searched with AI and there are no businesses with registration as T3Xtacticalshop.com

Buyer beware

Has anyone done business online with T3Xtacticalshop.com, Josiah Tutt seems to be principle?

I was surfing and saw he had T3X 10 rd mags for $60 each. I made contact and thru the process my gut was telling me something was wrong. He was limiting payment methods, the visuals on his web page was of furniture and text was a foreign language. He said…

Read more

Hi experiencing the same problem what was your outcome

Hello
everyone I have a semi custom build in progress Tikka T3 Action, Bell
and Carlson long range sporter adjustable cheek piece stock, Proof
research carbon fiber barrel 7mm SAUM and a Leupold VX-6HD Gen 2
3-18×44………Setting this up for a long range (1000 yards) Hunting rig. I am trying to decide what scope rings to use? I think I would…

Read more

6 Oct 2025.

I live in Australia and shoot long range here in Qld. I needed SRLB’s for our, (at the time) , Qty 4 x Tikka T3X TAC A1. I ordered 4 SRLB’s from Waters. Did not use initially when received. After a couple of months we got around to using them, or should I say…….. trying to use them….!!!

Only 1 fitted the other 3 would not…

Read more

Sportsman’s Warehouse has a 6.5 PRC 22.4 barrel threaded 5/8 x24 6.3 LBS 899.99 . First Tikka i have seen factory cut to this length in the t3x. I have a Dead Air Nomad ti xc for the suppressor , thinking a good balance ? Any thoughts ? Anyone one know when Tikka came out with the Gen 2 ? Also heard a gen 3 is out ??

Hello ! I’m on the lookout for a carbon fibre stock for a tikka t3x lite roughtech ( 300 wm) that is adjustable, like say the GRS bifrost, a similar carbon fibre stock will be lighter than the GRS stock , hence this request.

Plan to use the set-up as a light mountain rifle for hunting clients in Africa, need a stock that has push button a…

Read more

He refused a return on me despite what his website said. Item completely unused installed by my gunsmith. Had the item less than a week. Became instantly scary… Long insulting rants. Guys insane. I kinda think he is broke and didn’t have the money to return.

I have a new Tikka T3X .270 with a Laminate stock.

I ordered the Limbsaver #10806, but it does not fit. The package says it fits S & W (synthetic and wood). L for laminate is listed in the key above it but not in the description of this model.

The Tikka T3X laminate stock comes to a sharper point at the bottom of the stock, so the 10806 will not…

Read more

I my younger years, I killed a lot of groundhogs with a stainless Mini-14. The whistle pigs have pretty good eyesight; yet, I didn’t notice killing any less with the stainless over one of my blue guns.

In the county I live in each year close to 150 black bear are harvested. Wearing some orange clothing is mandatory. I think you’re going to be fin…

Read more

I revamped a sako A7 trigger assembly and with a little ingenuity I installed it on my Tika t3x, I now have a bolt release on safety on my t3x and love it.

Tikka super varmint , left handed shooters. Does the adjustment knob on the stock interfere with cheek placement?

What’s your favorite recoil pad ?

Got the rifle set up with Talley rings, the Burris scope and Limbsaver recoil pad. I realize the limbsaver is overkill for 243 but so be it. I took the time to clean it good and torqued the action screws to 35 front, 40 rear. I can’t wait to get out and shoot it. I also adjusted the trigger as low as it’ll go and 3 pulls showed 2.5lbs each pull.…

Read more

I’ll be picking up the rifle tomorrow. I ordered a set of Talley rings and a Burris Signature HD 3-15×44 scope for it. Don’t really need that much zoom but it was at a decent price.

I also did a mod and now I have a bolt release button if anyone is interested

Tika t3x in super lite.

I have a ticket a T react super light in 7 mm magnum. I’ve worked up a couple of loads, but I have shot some MOA one group at .387 and .432

I added a fastback butt pad, a unadyne muzzle break, and bottom metal because it was a bit to shoot being so lite weight but now its a kitten at 7.3 lbs with scope

I recently ordered a T3x Superlite 243 Winchester from Sportsmans Warehouse. It should be ready for pickup on 7/28. I have a Remington 700 adl 200th anniversary in 243 that I plan to sale in order to help finance the Tikka.

I also have a Remington 700 SPS in 7mm-08 that my dad gave me. I will never get rid of it. It sits in a Boyds Pepper Laminate…

Read more

Does the GRS Fenris for CTR fit the Drover without modification?

Selling on Ebay here is link:

https://ebay.us/m/ReZT0v

Hey all,

I picked up a T3x LITE ROUGHTECH ember in 30-06.. My intention is to use is this fall hunting season for Deer and Bear here in New England. While I have no problem with it for deer, what about bear or just in the woods in general…

Is the orange fleck in the stock a negative? I know it’s not everyone’s cup of tea but I like it mysel…

Read more

Looking for opinions on handload recipes for a TIKKA T3X .300win mag. I just started reloading my own rounds and complettd my first 25.

I reloaded using:

Brass: hornady SST (shot once)

Powder: 78gr of H1000

Projectile: hornady SST 180gr

Primer: no.250 CCI large rifle primer

OAL: 3.34 (0.009 over or under)

I did get some powder crunch and is a bit of a…

Read more

New in the box-unfired PVA Osprey SS barrel.

26″ Pre-Fit shoulder less for a Tikka action. 6.5 PRC. 1-7″ twist.

Weight is 4lbs. Josh at PVA quotes its a Brux style in a #5.5.

Its threaded 5/8″-24. Includes seamless protector. Muzzle is .720.

Ready to screw on and shoot!

Can be fluted & Cerakote to your particular taste.

Get the 6.5 cartridge full…

Read more

Hi everyone

I have an issue with my t3 hunter magazine latch. The magazine release latch will not “click” the magazine in unless I push the release latch forward

Has anyone come across this issue before ? Any help will be appreciated

I can upload a video if that helps

Barrel $190

Stock $145

I have swapped two factory stocks with Boyds. Both on T3x, one 223 the other 308. Both fit perfect.

What the chance of getting a magazine for an M65 6.5×55 and the cost?

Thanks, Harry.

Does anyone offer a match grade barrel in 17 hmr, thanks fellas

I have never had a problem using lapua brass when loading .223 in a factory chamber<div>The dies you choose shouldn’t make any difference. I’ve used RCBS Forster and Redding, one of the dies that is often overlooked is the Lee collet die, it perfectly sizes and aligns the neck for outstanding accuracy, i started using one on my practical 20, case… Read more

That’s great, your cases will love you

I’ve used boyds in the past, what concerns do you have

I know the super is stainless with cerakot

From my research, the super varmint is cerakoted stainless

Slick

I bought a T3 Lite (.30-06) in very good condition. One criticism I regularly see it the non-metal trigger guard/base plate. To this point I’ve not fired a round. Do you members recommend replacing this with a metal part? If so, which manufacturer?

I have a Tikka LSA 55 which I disassembled to refinish the stock. When I reassembled it, I discovered that the magazine latch/release no longer snaps into the bottom of the magazine. Can anyone provide schematics of the rifle? Also, my receiver is tapped for scope mounts. Can anyone advise what type of mounts will fit the tapped holes? Thanks…

Read more

Have a 243 and a 6.5 and they all love federal fusion, not sure why but the best tight groups out of 8 brands, its all I use now!

i sympathise, but no one else in the world is making quality replacement magazines for Tikkas, including Tikka itself. $185, that is $120 american, for a replacement mag for your ancient rifle is a good deal. You said yourself why he’s not answering emails. You said you just bought it. You said he’s away for the next few weeks. Be patient. You…

Read more

I just purchased a magazine for my tikka 308 m595 off Waters Rifleman and it didn’t click into place. My rifle is stock standard. I measured both magazine receiver latch tang with digital vernier calipers and there’s a 1.4mm difference between the two. No wonder the Waters Rifleman magazine doesn’t click in. I ofcourse emailed them and David said…

Read more