Member tisme
MemberForum Replies Created
-
Personally I've never had any factory ammo shot consistent sub 1 moa groups. My .308 T3 shoots 1/2 moa groups with home loads but that took a while to get the load developed.
Might be worth loading your own -
496 yards 1.708 inch 5 shot group from my T3 with 260 rem barrel shooting berger140s
-
25 grains of reloader 10 powder.
Remington cases.
Remington 71/2 small bench primers.
39 gr blitz kings
COAL 2.290 -
In the UK Valkyrie rifles for £5.
-
Welcome to the forum. The trigger can be made quite nice with an after market spring that cost very little but makes a big difference.
-
Sorry to drag up and old thread but 35, 45 or 52 anyone know?
Think I found the answer in this thread https://tikkashooters.com/public_html/gunsmithing/tightening-the-action-screws-on-a-t3/ -
Very nice I can see another build happening
-
GRS stocks are very nice and if the cost is too much there's a few showing up second hand these days.
-
My .308 shooting last week @ 300yards before a comp.
-
What caliber do you have , if it's like mine a .223 you have to slightly modify the Al mag to fit ,
Yep already had to do that on my .223 thats in a GRS stock. The Evo is going on a 308 and should be here today. 🙂
-
I've just ordered a third eye stock they are very nice. When you reload you should get 1/2moa groups if you spend enough time developing.
-
I'd be very interested in one. Std length is fine in my .204.
-
I tried 69 grain sierra match kings in mine and they wouldn't stabilise, I found 55gr much better until I changed the barrel to a 1-9 twist.
-
Hey tisme… could u give me your inner oal measurement of your acis mags? I need to know if my loads will fit.
Hi
2.888 is the inner OAL of my AICS mag. -
What kind of mag system are you useing? Im shooting berger bullets cause i cant get my ogive to the lands so im curious how others are handling this issue with reloads.
I have the same problem so I fitted a bottom metal to take ACIS mags. Still couldn't get the berger 155 near the lands. I don't think they would get near even if you only just seated them into the case. I gave up with 155 bergers in the end after trying some 175 SMK and getting the to group a 1/4 inch at 100 yards with enough speed to go out to 1000yards form the short barrel. 200 grain Bergers would be worth trying.
