-
T3X Firing Pin Removal
Hello everyone
Ive been going through my T3x Stainless varmint in 223 and giving everything a good spring clean.
Ive taken my bolt apart as per the videos on the net but I would like to take off the firing pin spring too and polish up the firing pin as it has a few scuffs/burrs on it. Whilst I was at it I wouldn’t mind replacing the firing pin spring with a new one too.
Does anyone on here have a video or know how the firing pin spring comes off?
Thanks in advance.
-
1 Reply
-
I’m going to do something like this for the polish section as mine is rough for sure better after cleaning but needs work; recently had to fix my chamber as it was rough and extraction and way over heavy bolt lift after firing
https://www.youtube.com/watch?v=YyL76KgkTOk
this is link for spare parts with instructions.. small parts kit might be handy: has 5 snap rings; this site has instructions step by step for setting up vice to make disassembly better; will probably do something like this to make disassembly better and easier
https://lumleyarms.us/tikka-t3-t3x-striker-spring
This is cleaning only with tips:
Log in to reply.