-
T3 Tactical 6,5
Hi
As I have shown here before I have built a bastard betwen a TRG and a T3.
Now it's nearly finneshed and I tought you wanna see the result.
TRG stock where I have lightend it considerably (by approx a lbs) by changing a number of steel parts to alu.
Scopemount is my own scopemount here shown with a newly developed solution for using SIMRAD NV to longer scopes.
I did flute the bolt, pretty meaningless thing but I had to try 🙂
Best Regards Håkan
-
6 Replies
-
T3 Tactical 6,5
updated 10 years, 2 months ago
4Members
·
6
Replies
-
Wow! That looks like quite the machine! What cartridge is it – 6.5 ??
-
6,5×55 Ackley improved.
130 Gr. Norma VLD bullets at slow 3000 fps.
Barrel is factory, standard, Only thing I have done to it is rechamber it for ackley improved.Action is not bedded, it's just against the aluchassis.
Here is a 100 meter five shot group shot from prone.The gun have shot well over 2000 rounds, probably 2500 rounds.
This group of five rounds was shot yesterday by a friend who never shoot rifles…..:)I think Tikkas are remarkable, match accuracy, without blueprining or special barrels:)
Håkan
-
That is amazing! What kind of stock/chassis are you using?
– Todd
-
Its a TRG stock that I made new chassis for.
I did also loads of work to cut the weight down and changed out many of the steel parts to alu and got away with approx 1 lbs totally.Håkan
-
6,5×55 Ackley improved.
130 Gr. Norma VLD bullets at slow 3000 fps.
Barrel is factory, standard, Only thing I have done to it is rechamber it for ackley improved.Action is not bedded, it's just against the aluchassis.
Here is a 100 meter five shot group shot from prone.The gun have shot well over 2000 rounds, probably 2500 rounds.
This group of five rounds was shot yesterday by a friend who never shoot rifles…..:)I think Tikkas are remarkable, match accuracy, without blueprining or special barrels:)
Håkan
Hi Hakan ,
Very nice rifle in a very nice calibre!!
I am too running a 6.5-55 Ackley with 50 grains of Viht N160 and the 123 A-max @ 3000fps!!
May i ask what powder you are using to run the 130 Normas?? , are these same used in the Norma Diamond line factory?? if so are these the berger 130 VLDs???
Thanks and all the best ,
Ray. -
I like the paint!
Log in to reply.