-
QD Mounts
Few years back I ordered a a single QD ring mount for my Tikka M55 from a small manufacturer in Finland. I found that it worked for me, and now I have two each on my M55 and T3, and one on an old Tikka M07. I posted a review here last year, in the “Product Reviews” thread. These mounts are not meant for competitive target shooters, but they give you access to your irons in seconds, or with two mounts, the ability to swap scopes on the same rifle as needed.
Ordering and payment used to be somewhat cumbersome, but the manufacturer has now set up a “web store.”
So, go check out a great scope mount option for your Tikkas, at http://www.masina-tuote.com/en/
I'm not affiliated with the company, but I love my Tikkas… and I just want to pass on the word to other Tikka fans!
-
3 Replies
-
QD Mounts
updated 7 years ago
3Members
·
3
Replies
-
Thanks for the information, I swap scopes between 2 Tikkas with pic rails from MT, using a DNZ one piece Freedom reaper mount. It is not perfectly repeatable but I use a torque wrench and it's close.
-
Few years back I ordered a a single QD ring mount for my Tikka M55 from a small manufacturer in Finland. I found that it worked for me, and now I have two each on my M55 and T3, and one on an old Tikka M07. I posted a review here last year, in the “Product Reviews” thread. These mounts are not meant for competitive target shooters, but they give you access to your irons in seconds, or with two mounts, the ability to swap scopes on the same rifle as needed.
Ordering and payment used to be somewhat cumbersome, but the manufacturer has now set up a “web store.”
So, go check out a great scope mount option for your Tikkas, at http://www.masina-tuote.com/en/
I'm not affiliated with the company, but I love my Tikkas… and I just want to pass on the word to other Tikka fans!
Just purchased an M07 and need mounts. can any one tell me if the dove tail is the standard Tikka width and therefore will Warne Tkka QD or fixed mounts fit?.
-
Just purchased an M07 and need mounts. can any one tell me if the dove tail is the standard Tikka width and therefore will Warne Tkka QD or fixed mounts fit?.
So that we are talking about the same thing: Your Tikka M07 is a combination gun? If so, you have 11mm dovetail on the receiver. Other Tikkas have 17mm dovetails, so mounts made for them will not fit. If you want fixed mounts on it, most 11mm mounts should fit fine; However, take the gun with you to the store to be sure. If you want to keep the access to the irons (like I did) you want QD mounts. They can be ordered on-line, for example from the company I mentioned in my earlier post. For any QD mount, you also have to have a slot milled for a recoil stop/index pin on the receiver. Indexing the mount on the rail will lead to problems. If you want, I can send you a photo of the mount, and the milled slot so you can see what I mean.
Log in to reply.