Are you in the U.S.?

Yes sir.
The base has been sold, but if you are in the U.S. and interested I have a standard 0moa EGW base available.

No problem.

He spends a lot of time on 24hourcampfire.com, you might get answers quicker over there.

http://forum.snipershide.com/options-accessories-sale/266682-tikka-sporter-stock-new-factory-take-off.html

bump

Remington 140gr psp shot good in my 7mag, but never shot anything else out of it.

Was your cleaning during breakin done from the chamber end? If not I would say you did the damage while cleaning. I would have the barrel cut and recrowned.

I'm interested in the scope, please send pics to roundcall@yahoo.com.

Not sure if you got my PM, but here are two…

http://www.24hourcampfire.com/ubbthreads/ubbthreads.php/topics/6628071/Tikka_T3_Lite_204_Ruger#Post6628071

http://www.24hourcampfire.com/ubbthreads/ubbthreads.php/topics/6646806/Another_Tikka_T3_Lite_in_204#Post6646806

PM sent.

Yes there is enough room to fit a varmint barrel, I have seen 2 of them done.

                      Booger

Where did you see this done? B and C says no way.  Got a link or pics?

Look at the pic I posted on the first page, there is plenty of room to be opened up for a standard varmint barrel. I think B&C just don't want their stocks to be modified by… Read more

Devin of Sin Arms has been rechambering the 338 Tikka's to his 338sin and reports are sounding really good.

I can't see the pic, it says file is empty.

PM sent

My HSS is a little loose also. I just received two from the guy out of Canada and they fit nice, these would be the one's I recommend.

Pics posted for sluggo….

I can help you with the pics, send them to roundcall@yahoo.com

You will be fine running a bipod, I have no flex in mine. There is plenty of room to open up for a larger barrel. I have opened mine up since the pic, but even as it was in the pic the stock wouldn't make contact with the barrel when loaded up on the bipod.

Doesn't Warne make a ring for Tikka? I will have to see if I can find some info on their site.

EDIT: After going back and reading ALL of Jason's post I saw where he said he just got in some of the Warne rings.

Welcome to the board.

PM sent.

I would be very surprised if it didn't shoot under 1″, I think you will be very happy with the results. I have a T3 270win & 243win and my uncle has 22-250 & 270wsm they all shoot under 1″ with handloads.

I didn't check the before/after weight, but I'm sure that its a little heavier than the plastic stock. I have my 243win set up with the same base/ring combo and both scopes are 2.5×10 Monarchs only the 243 has 50mm obj. and the 270 has 42mm obj. so they should be a real close comparison, I will weigh them both and post up #'s…

Read more

I didn't check the before/after weight, but I'm sure that its a little heavier than the plastic stock. I have my 243win set up with the same base/ring combo and both scopes are 2.5×10 Monarchs only the 243 has 50mm obj. and the 270 has 42mm obj. so they should be a real close comparison, I will weigh them both and post up #'s… Read more

I was finally able to get out to the range last week to see how it shot with the new B&C stock. I can tell no difference in accuracy with the new stock. Where I can tell a difference is the rifle is much more comfortable to shoot now and the sound transfer through the hollow factory stock is now gone. I just picked up a T3 in 243win a couple weeks… Read more

If it were me I would go with the 270wsm. I would buy a long action mag for the extra room and modify the bolt stop if needed to allow for use of the longer mag. I currently have a T3 in 270win really want to rebarrel to wsm as I had one in a Remington rifle and loved the round, but the Rem is being setup for Fclass as funds permit.

I would like to see an option cheaper than factory mags.

Yeah the price is pretty steep, but its the only option I have seen if you want to use a factory mag.

You can get the bottom metal here…
http://www.alutek.eu/

Great to see a Tikka dedicated site, hope it takes off.