-
The new GRS Berserk
-
Thanks Larkin-
I looked at the Bolthorn, but it is just not what I was hoping for. And, sometimes things being a bit more plain – but more usable for any more people – can make sense ( actually DOLLARS and cents! 😉 8) for a manufacturer that does not want to ignore at least 20% of the market. Again, if you read my post earlier, I empathize…to a point. but we all have a “bias” in how we see, think. and respond to the world around us. If you are born right handed – you can't be blamed for that. Nor can we left handers.
Good long range thinking and engineering can simply yield MORE profit in this case…not additional cost.If you are right handed – and not had the
painprivilege to grow up with a sibling that was a Lefty – it may be more difficult for you to sympathize, and that is understandable.I was trained to shoot right bolt guns with a support ( bag, pod, rock or whatever was nearby ) and still can. And, I own right hand rifles. But – @#$% it!!! I WANT some left guns – because the muscle memory and left eye dominance that my genes are programmed for – are faster and inherently a little better than forcing a right hand response.
-
That is worth noting Larkin, and something I did in fact overlook…. :-[…. ;D
O.K. – lets add ambidextrous grip to the “Lefties wish list” 😉 😀
Ambidextrous 10 degree slanting ? That would be a neat trick ! 🙂
-
Sometimes I think some people just want to have a rant and will not be happy no matter what
-
OK… I just got an update from GRS and the Berserks should be here in 2-3 weeks.
Initial price will be $599 per unit!
I'm working on the info page on our site now that I know when we'll be getting them.
Stay tuned!
-
Great stuff!
-
Jason,
Will there be any issues shipping one of these to Canada if i place an order?
Also, did you have a chance to take pic's of a lite barrel in the stock?
-
No problem going to Canada and I did take a photo with the Lite contoured barrel.
I'd post it here but it's a pain. Who runs this forum anyway? ;D
-
I would like to see a picture of it with your aluminum bottom metal.
-
I have some of if those 😀
Greg and I spent 4 hours today taking product photos.
Some close ups have already been published on our bottom metal page.
-
Got it all together now. Nice stock, feels great to hold. Minor gripes with all Three stocks though:
– The load bolt recess is Little too shallow so the load arm bottoms on the stock. Little fancy Dremeling fixed that.
– The recess for the bolt release axel is also a bit too shallow so same thing there.
– The OEM rear stock bolt is a bit too long for the Berserk so i ground it down a millimeter.After these small flaws were fixed the stock passform is great. The action almost sucks down into its Place.
I had the same problem with all Three stocks and i´ve e-mailed GRS about the situation. -
OK… I finally got all the pictures edited and the link posted. Be sure to click on the main photo and you'll be able to see all the other photos as well.
The stainless T3 in the photos is my 223 Lite. It looks pretty good in that barrel channel!
These will be shipping from Norway Wednesday and should be in our shop in a couple weeks.
Let me know if you guys have any other questions or have other picture angle ideas.
https://tikkaperformance.com/grodas-rifle-stocks/grodas-rifle-stocks-ready-to-ship/T3-GRS-Berserk
-
I just received my Berserk Stock from MT and it is a very nice piece of work!! Cheek piece and But pad adjustments are crisp and there is no wiggle. It comes with a recoil lug installed (I forget what it is made of). Now I just have to decide which of my T3's to put in it!
-
I just received my Berserk Stock from MT and it is a very nice piece of work!! Cheek piece and But pad adjustments are crisp and there is no wiggle. It comes with a recoil lug installed (I forget what it is made of). Now I just have to decide which of my T3's to put in it!
Don´t be a wuss : Buy one for each ! 🙂 🙂
-
I just received my Berserk Stock from MT and it is a very nice piece of work!! Cheek piece and But pad adjustments are crisp and there is no wiggle. It comes with a recoil lug installed (I forget what it is made of). Now I just have to decide which of my T3's to put in it!
Eric,
Let me know if its a true drop in or if you have do a couple minor cosmetic changes like Sir Ville…
Thanks.
-
I just received my Berserk Stock from MT and it is a very nice piece of work!! Cheek piece and But pad adjustments are crisp and there is no wiggle. It comes with a recoil lug installed (I forget what it is made of). Now I just have to decide which of my T3's to put in it!
Don´t be a wuss : Buy one for each ! 🙂 🙂
Lol believe me I'm tempted! Good thing MT only had the one unspoken for at the time!
Hi Dog, when I get a chance I will try it on all my T3's; 30-06 hunter, .223 sporter, 6.5×55 sporter and when it arrives my .223 light
It looks like a very clean inletting job and I think the slender barrels will not look out of place. The MT bottom metal will make a very clean install. Also my silver anodized .223 10 shot mags will look great. Pictures will be forthcoming…
Log in to reply.