-
I’ve had several inquiries about scope ring height and I’ll post some additional pictures to clarify. So I’ve found the Larue LT845 to be perfect for the Vortex Razor HD2 4.5-27 x56 and have used that QD mount for both my Tikka and my MPA BA and it’s perfect! 1.5” would be cutting it VERY close. You will barely have enough room for a objective lens cover with a 1.5” ring height. So from the picittini rail to the top objective lens is 2.72” and the objective lens is right at 2.40”. Cut that in half and we get 1.2”. So 2.72”-1.2=2.52”. So you have 0.02” to play with if you use 1.5” rings. Like I said=cutting it CLOSE. Just for gits and shiggles I took an eyepiece lens dust cover and measured the thickness and it’s sitting at .050”. Like I said=1.5” just doesn’t cut it with the Vortex Razor 2 4.5-27×56 unless you shave the picittini rail on your rifle…which I wouldn’t recommend.
