MemberMarch 28, 2018 at 10:41 am1 Bullseye
Thanks for the comeback Dog ….
Funny you should mention the “free floating” barrel, NOT being free-floating the entire way. I had already caught this. I slid a piece of paper between the stock & barrel, and sure enough, it stopped about 2″ short of the action. I marked where it was pinching, took it apart and sanded down the sides equally until I could slide the paper all the way down to the action. All good now. I will add the bottom metal, I saw that on Mountain Tactical's site. I also will definitely pillar bed the stock … easy job. I have most of the recommended ammo, and certainly will fllow up with a report after testing and chrony results.
Thanks again ….. 🙂 🙂